Made from high carbon steel. Accurately machined, these high quality
precision tools are designed for fine assembly operations on electronic circuits.
Following styles are available with side cutter, flat, round and bent nose, allowing
bending setting shaping operations, even in confined areas. Accurate heat treatment
provides the necessary performance and durability.
An exceptionally clean smooth cut. Light-weight and easy handle.
Particularly finished in consideration of its use in the electronic field and for
thousands of finishing cuts of leads.
|
AT-101-E
5” Micro Cutting Pliers w/Conductive Handle
|
AT-25P-CE
5” Micro Cutting Pliers w/Conductive Handle and Safety Clip
|
|
Cutting
capacity: 16AWG (1.3mm)
|
Cutting
capacity: 16AWG (1.3mm)
|
AT-30-E
5” Micro Cutting Pliers (125mm) w/Conductive Handle |
AT-5101-E
Heavy Duty Cutting Pliers (125mm) w/Conductive Handle |
|
Cutting
capacity: 14AWG (1.6mm)
|
Cutting
capacity: 12AWG (2mm)
|
AT-25P-E
5” Micro Cutting Pliers w/Conductive Handle |
AT-5101-CE
Heavy Duty Cutting Pliers w/Conductive Handle and Safety Clip |
|
Cutting
capacity: 16AWG (1.3mm)
|
Cutting
capacity: 12AWG (2mm) soft wire
|
AT-102-E
6” Long nose pliers (150mm) w/Conductive Handle |
AT-105-E
6” Bent nose pliers (150mm) w/Conductive Handle |
|
|
|
AT-103-E
Round nose pliers (140mm) w/Conductive Handle |
AT-5102-E
Heavy Duty Long Nose Pliers (150mm) w/Conductive Handle |
|
|
|
AT-104-E
6” Flat nose pliers (150mm) w/Conductive Handle |
AT-209
Antistatic Clean cut micro nipper |
|
|
A
very high precision nipper. The 50° Angular nose facilitates work on
inclined and difficult planes.
Cutting capacity up to 22AWG.
|
AT-210
Antistatic Clean cut micro nipper |
AT-211
Antistatic Clean cut micro nipper |
|
This
nipper was designed with integrated circuits in mind. It is suitable for
closely spaced leads of micro and SMT IC'S.
Cutting capacity up to 22AWG.
|
This
nipper was designed for delicate work.
Cutting capacity: 0.8mm-20AWG soft wire.
|
AT-3001-E
& AT-3002-E
Precision Wire Stripper w/Conductive Handle |
|
|
- Stripping
without damaging the conductors and can be used as pliers, shears
and wire strippers.
- Built-in closed stopper.
- Less fatiguing, constant force recovery spring added.
- Precision pliers. Almost equal to precision tweezers.
-
Provide easy work with high density P.C.B’s.
-
Ergonomically shaped, non-slip grips and lightweight
for operator comfort.
|
|
 Conductive
Handle
|
Cut
Copper
Only |
AT-3001E |
AWG |
30, 28, 26, 24, 22, 20 |
| MM |
0.2, 0.3, 0.4, 0.5, 0.6, 0.8 |
| AT-3002E |
AWG |
20, 18, 16, 14, 12, 10 |
| MM |
0.8, 1.0, 1.3, 1.6, 2.0, 2.6 |
|
